1. Home
  2. Products
  3. Sandblasting Machine
  4. Dry Sandblasting Machine

Dry Sandblasting Machine

Dry sandblasting machine are suitable for surface treatment of all products of metal, plastic and glass ect.
Removing oxide skin. Residues burrs and scratches can be used for decoration light .matte and strengthen management, There are cyclone separation system and dust removal system, separator will separate the Abrasive from bust .and dust removal system can deal with and collect the emit useless dust, dust remove effect of good. Reduce the cost of abrasive and improve efficiency. And there is no environmental pollution.

Blasting media can be: White Aluminum Oxide . Brown Aluminum Oxide . Glass Beads , size:150-320mesh
Technical data of different models

Model Outside size (L*W*L mm) CABIN size(L*W*L mm)
COLO=6050EA 960*650*1520 600*500*520
COLO-7660EA 1050*810*1580 760*600*520
COLO-9060EA 1050*950*1580 900*600*580
COLO-9080EA 1250*950*1580 900*800*580
COLO-1010EA 1420*1050*1900 1000*1000*800
COLO-1212EA 1620*1250*2000 1200*1200*800
Power supply: 110/220V(380V). 50HZ/60HZ
Lighting: flood light incandescent lamp 220V, 13W
Separator motor: 220V, 50HZ, 0.75KW Or as request
Compressed air supply: Dry and clean compressed air with pressure at 2.8-7bar(kg/cm2) and flow of 0.5-1.1m3/min
Dust removal: Bag-type dust collector, powder clearance by compressed air vibration

There is a Thermostatic heating device in drying automatically to prevent abrasive from breathing
Inquiry Form